nav-left cat-right

Types of Concrete Driveways

Ordinary concrete driveways casting has been for decades one of the least expensive ways to place a hard surface like a driveway, but you cannot deny the fact that it looks cheap. There are a number of products around that can improve appearance, but first we will see the benefits of plain concrete.

Plain poured concrete

The cost has been mentioned already, and although the pouring and placement of the wet material may be a dirty job, it is probably faster than putting blocks or bricks on the same area unless your home has a very short driveway. The groundworks are certainly not worse than a block work. If you have a good soil, you can get away with digging half the depth of the excavation and not have to put a sub-base either. You may need to lay edges, permanent and decorative, or temporary, only while the concrete is lying, but again it’s probably less work to put a proper edge course for a unit block or a flag.

Once it has been laid, there is very little you can do to decorate the concrete, apart from making grooves with a brush. Although this is something you should do anyway, to help drain and give a safe footing in wet conditions, rather than for looks. On the other hand, techniques have come into the market over the last 20 years that can significantly improve the appearance of concrete.

Patterned and textured concrete

Pattern imprinted concrete (PIC), sometimes called stamped or textured concrete has a pattern printed on it after being laid but before it has dried. Color dyes can be added before printing, so there is really no limit to the look you might have. Then printing occurs, which is really like potato stamps, but on a larger scale.

Molds are large alloy or plastic mats with a raised pattern on them in reverse. Here they are placed on the concrete and groomed to print the pattern.

There are two basic types of pattern. The first is more of a texture, like slate or stone instead of a pattern, and it is easier to establish because there is less precision involved. The other includes more regular patterns where you should take great care to align each carpet with its neighbor. There are a multitude of models available in this second category, the most popular is a herringbone pattern in brick or stone patterns, but cobbles do well too.

Garage Door Spring Maintenance

garage door repair in St. LouisThe sound of screeching, squealing or grinding garage door is annoying, but the sound is a vital signal for a home owner that the springs of the garage door requires immediate attention. Providing routine maintenance twice a year for the springs of the garage door be it torsion or extension addresses problems that arise due to normal wear of repeated up and down movement, checks any adverse effect of the season and the weather, and allows early detection of a fault in the mechanism itself.

What you need to know

Most of the elements required to lubricate the garage door springs are regular household items such as cotton rags, a mild detergent and lubricating oil (such as WD-40).

Maintaining garage door springs

Step 1

Apply a thin lubricating oil line on top of the torsion springs from one end to the other. Allow the oil to coat the outside of the docks and seep between the seams.

Step 2

Apply a thin line of lubricating oil over the entire length of the extension springs. Allow the oil to penetrate the seams of the springs and cables.

Step 3

Open and close the garage door two to three times once the oil is applied to allow the lubricant to completely cover the inner portion of the springs.

Step 4

Continue the maintenance exercise by lubricating all hinges, seals, rollers and pivot points which are the moving parts of the garage door mechanism.

Step 5

Clean any grease, dirt and debris in the tracks of the roller with a cloth moistened with a solution of water and detergent. Consult the owner’s manual for instructions on whether the oil can or cannot be applied to leads for your particular model of garage door.

Tips & Warnings

Grease torsion and extension springs once or twice a year and all moving parts, including hinges and rollers an additional three times a year.

When greasing torsion or extension springs, do not attempt to repair or fix the problems encountered during routine maintenance. This is because broken or defective springs could be dangerous. Consult a professional garage door technician to resolve problems with faulty springs. We have lot of such people who does garage door repair in St. Louis, and they are cost effective.

How Much Does It Cost To Replace A Window?

St. Peters window company There are many benefits of installing window replacements. Windows can add warmth and light to the home, beautify the inside and the outside of your home and improve the overall value of your home. This is one of the reasons why you should consider quality windows to be a worthwhile investment said an expert St. Peters window company consultant who actually is one of my frequent blog reader.

Unfortunately, the cost of window replacement will depend on several factors such as type, materials used, dimension, security features, complexity of installation and the number of windows that will be required.

Number of windows

In general, the more the windows that you will require to install, the more expensive the cost of installation will be. However, most installation professionals charge less for every window in case you install several windows at the same time. If you intend to replace several windows, it is advisable to talk to a professional about the installation cost as this will help you to save money in the long run.

Windows size

Windows are usually of different dimensions depending on the areas where they are needed. In most cases, living rooms have bigger pictures that are hung in multiples that range from the 3 by 4 to the 6 by 6. The standard bathroom windows are usually smaller and may range from the 2 by 1.5 to 2 by 3. The key windows manufacturers can help to customize windows to different dimensions but you should understand that you will pay more for the added sizes.

Window Sash materials

The windows that are made of vinyl are not only inexpensive but they require little maintenance. These can also be quite durable. They do not swell or shrink as a result of humidity changes. Many manufacturers of vinyl windows are able to stand behind their products with strong warranties.

However, these windows also have their fair share of drawbacks as they aren’t as attractive or sturdy as wood. The wooden frames cost more. They also require regular maintenance. If you do not finish or repaint the wooden frames, they can be susceptible to different elements. However, the money and work is compensated for by the classic and authentic appeal of wood.

Window panes

With new windows, it is possible to save a considerable amount of money on your utility bills and to make your home more comfortable. Many windows are usually rated using the U-factor. The lower the figure is, the more energy efficient the windows will be and the higher the initial cost. The double-pane doors usually cost more but they will end up being cheaper in the long run.

Other factors

It is definitely cheaper to do window replacement than to cut walls for the new ones. It may be necessary for you to talk to your contractor and security firm to find out how you can make your windows burglar-proof. You should also remember that windows that need to be fixed on the first floor are usually more expensive to install as a result of the access issues. Other factors such as where you live and the individual window replacement company that you choose will also affect the price.

Therefore, it can be quite tricky to calculate the cost of window replacement.


basement remodeling in St. Charles, MOWindow wells are usually small structures that are positioned outside ground-level basement windows which allows more light in and also keep soil and water away from window. It is mostly a few feet deep and it is filled with a small layer of gravel to drain the well. Window wells are installed usually for the purpose of preventing water penetration through the window, preventing water damage to the window frames and also to allow for egress out of the basement if an emergency arise. Without a window well, some basement windows will be below grade and they will be a source of insect damage, water leakage and wood rot. Basement remodeling in St. Charles, MO as of recent has always been going alongside with a basement window.

Basement window wells also allow for more light to enter the basement area. It is important that window wells have a drain, this is the drain that pipes water away from the interior of the well. Some window wells do have a drain pipe that leads to the drain around the base of the foundation walls which can be cause problems because this means putting water very close to the exterior foundation walls. It is very expensive to excavate down and install drainage pipes that discharge to a safe area. At a minimum, to better allow for drainage, there should be a foot of gravel in the well. Installation of window well covers is highly recommended.

They may not look that good but they help in keeping debris and leaves away from the well interior. They also help prevent snow and water from collecting inside the well. If you are in a dry region, it might be an overkill to install window wells but they help in protecting basement windows from physical damage. Two inches isn’t too much and it is wise to install them if you are planning to raise the grade around your basement window with flower beds or something.


carpet cleaning The required materials and tools needed to extract water from your carpet are: Hammer Dust mask Pry bar Utility knife Rags Carpet cleaner Commercial dehumidifier Commercial air mover fan. Carpet pad Bleach, soap and water. Rent a carpet cleaner or a commercial extractor to handle the carpet cleaning  and suck out as much moisture as possible. When it’s time to extract the water, don’t waste time with a wet/dry shop vacuum because it doesn’t have enough power. Rent an extractor or a carpet cleaner instead, one or two air mover fan and a large commercial dehumidifier. Ensure you rent the largest dehumidifier available because big dehumidifiers can remove up to 30 gallons per day.

Extraction is far more effective than dehumidification by about 1,200 times. Move the extractor across the carpet slowly to suck up as much water as possible. This set mustn’t be rushed. When the water is out, the carpeting should be peeled back and the wet pad should be removed. The pad should be cut into strips, rolled up and hauled outside. You can try drying it yourself by rolling it out on your driveway, If the weather is hot, sunny and dry and if that works, you can tape it back together and reinstall it.

Don’t waste time trying dry the old pad because new carpet pad is cheap and replacing the carpet padding alone is less expensive than having to buy new carpet for your home. The carpet should be laid back on the floor. Fire up the air movers and dehumidifier. Keep the temperature at below 75 degrees because a higher temperature will accelerate the growth of bacteria. Steam clean the carpet to sanitize and deodorize properly. Clean the walls, hard-surface floors and other household surfaces with soap and water and sanitize them with a solution of 1.5 cups of chlorine bleach to one gallon of water.

Choosing a Contractor for Home Remodeling Projects

imagesIn case you are going to hire a contractor for your home remodeling project, make sure to choose a good one. Starting a home change venture can appear to be overwhelming, however with intensive exploration, legitimate financing and a dependable contractual worker you can roll out an energizing improvement that enhances your home estimation and makes you grin each time you stroll in the entryway. As mortgage holders, we take pride in our home’s appearance and condition, and we do our best to keep it very much kept up consistently. What’s more, on the off-chance that you haven’t effectively done as such, you will most likely sooner or later wind up in a position that will oblige you to employ a contractual worker.

Tips for Choosing a Contractor for Home Remodeling Projects

images (9)Whether it is a redesign, repair, or expansion, an authorized contractual worker is crucial to your basic leadership before beginning any home task. Nonetheless, picking a respectable and solid contractual worker is a standout amongst the most difficult assignments to attempt. A hefty portion of us has heard the awful stories from family or companions about contractual workers over-charging, taking always to finish a venture, or leaving customers baffled and disappointed at last.

In spite of the fact that the notoriety of a couple of rotten ones stains the waters for whatever remains of the business, it is critical to recollect that there are a lot of people who take pride in their work and their notoriety for being an authorized temporary worker. A clear indicator of the contractor’s dependability is the quote. An evaluation ought to separate the undertaking spending plan in the process of planning and the buying of materials so you can comprehend where your cash is going. Once you’ve settled on your decision certain the points of interest of the agreement incorporate the work routine, installment calendar, and materials list.